Jia, J. M. Optimization and practice of cold production technology of heavy oil in Northern Zazi oilfield. Petrochemical Appl. 37 (04), 59–62 (2018).
Martyushev, D. A. et al. Study of void space structure and its influence on carbonate reservoir properties: X-ray microtomography, electron microscopy, and well testing. Mar. Pet. Geol. 151, 106192 (2023).
Aydin, A. Fracture void structure: implications for flow, transport and deformation. Environ. Geol. 40 (6), 672–677 (2001).
Li, Z. Y., Pan, L. & Cao, F. Waterflooding development of fracture-cave carbonate reservoir. Pet. Sci. Technol. 31 (10), 1027–1039 (2013).
Lei, Q. et al. Progress and development directions of shale oil reservoir stimulation technology of China National petroleum corporation. Pet. Explor. Dev. 48 (5), 1198–1207 (2021).
Wang, H., Gala, D. P. & Sharma, M. M. Effect of fluid type and multiphase flow on sand production in oil and gas wells. SPE J. 24 (02), 733–743 (2019).
Pan, Q. et al. Design and investigation on a piezoelectric screw pump with high flowrate. Smart Mater. Struct. 30 (8), 085019 (2021).
Ye, Z., Jin, C. & Pang, Y. Research on optimizing the drilling rate for through-tubing drilling and sand pumping tools. Petrol. Sci. Technol. 1–20 (2024).
Zhu, X. H., Li, J. N. & Tong, H. Mechanism analysis and process optimization of sand and plug removal with rotating jet in horizontal well. J. Cent. South. Univ. 20 (6), 1631–1637 (2013).
Cao, X. et al. Progress and prospects of development technologies for lowpermeability oil reservoirs in Shengli oilfield. Petroleum Geol. Recovery Effi. 31 (5), 48–55 (2024).
Salahi, A., Dehghan, A. N., Sheikhzakariaee, S. J. & Davarpanah, A. Sand production control mechanisms during oil well production and construction. Petroleum Res. 6 (4), 361–367 (2021).
Cao, Z. et al. Geological control factors of micro oil distribution in tight reservoirs. Mar. Pet. Geol. 77, 1193–1205 (2016).
Liu, S. S. Study on reservoir-wellbore sand production law of weakly consolidated sandstone reservoir. (Doctoral’s Thesis (China university of petroleum (Beijing), 2022).
Harris, M. H. The effect of perforating oil well productivity. J. Petrol. Technol. 18 (04), 518–528 (1966).
Fan, J. et al. Experimental study on the mechanism and development effect of multi-gas assisted steam Huff and puff process in the offshore heavy oil reservoirs. J. Petroleum Explor. Prod. Technol. 11, 4163–4174 (2021).
Liu, D. et al. Clean drilling fluid remarkably lmprove the cementing job quality of shallow oil and gas wells in North Buzachi. Drill. Fluid Completion Fluids. 4, 6–9 (2008).
Bellarby, J. Sand control. Developments Petroleum Sci. 56, 129–239 (2009).
Ikporo, B. & Sylvester, O. Effect of sand invasion on oil well production: a case study of Garon field in the Niger Delta. Int. J. Eng. Sci. 4 (5), 64–72 (2015).
Yuan, W., Han, Y., Gong, N. & Chen, L. Research on the influencing factors of sand production in oil well and analysis of sand control. Energy Energy Conserv. 1, 6–7 (2017).
Wang, Y. L. Influencing factors and countermeasures of sand production in wells in sand production area of block A. (Master’s Thesis (Northeast Petroleum University, 2018).
Nie, S. et al. A review of the research status and development prospects for gravel packing sand control in horizontal wells. Geoenergy Sci. Eng. 212152 (2023).
Safaei, A. et al. Chemical treatment for sand production control: a review of materials, methods, and field operations. Pet. Sci. 20 (3), 1640–1658 (2023).
He, X. et al. A critical review on analysis of sand producing and sand-control technologies for oil well in oilfields. Front. Energy Res. 12, 1399033 (2024).
Soroush, M. et al. Challenges and potentials for sand and flow control and management in the sandstone oil fields of kazakhstan: A literature review. SPE Drill. Completion. 36 (01), 208–231 (2021).
Durand, R. Basic relationships of the transportation of solids in pipes—experimental research. 5th Congress of the International Association of Hydraulic Research. Minneapolis, Minnesota, USA, (1953).
Liu, A. & Deng, J. Research on critical sand transportation velocity for low viscosity liquid flow in vertical well-bore. Oil Drill. Prod. Technol. 1, 31–33 (2007).
Dong, C. et al. Sand-carrying flow in low-viscosity wellbore fluid and characteristic flow velocities. Acta Petrolei Sinica. 37 (10), 1280–1286 (2016).
Jiao, Y., Li, P., Wang, L. & Fan, Y. Experiment and calculation of critical sand-carrying velocity for high-viscosity fluid in vertical wellbore. Acta Petrolei Sinica. 39 (5), 604 (2018).
Li, M., Wang, W., He, Y. & Yuan, M. Study on the law of sand carrying in vertical wellbore. J. Univ. Petr. China (Nat. Sci. Ed.) 2 33 –35 + 43 – 9 + 8 (2000).
Zhang, G. et al. An experimental study on the startup velocity and motion characteristics of sand beds in air–water pipelines. Energy Sci. Eng. 10 (7), 2290–2304 (2022).
Kim, C., Lee, M. & Han, C. Hydraulic transport of sand-water mixtures in pipelines part I. Experiment. J. Mech. Sci. Technol. 22, 2534–2541 (2008).
You, Y. P. Study on sand deposition law and critical condition of fluid carrying sand in inclined gas gathering pipeline. Master’s Thesis (China University of Petroleum (East China), 2021).
Wang, Z., Deng, J., Sun, F., Zhou, J. & Liu, A. Experimental study on sand grain migration in wellbore. Acta Petrolei Sinica. 4, 130–132 (2006).
Archibong-Eso, A. et al. Experimental study on sand transport characteristics in horizontal and inclined two-phase solid-liquid pipe flow. J. Pipeline Syst. Eng. Pract. 11 (1), 04019050 (2020).
Wan, C. et al. Numerical simulation research of solid-liquid two-phase flow in vertical pipe under forced vibration. Chin. J. Theoretical Appl. Mech. 56 (3), 586–596 (2023).
Shao, B., Yan, Y., Bi, C. & Yan, X. Migration of lrregular cuttings particles in big size by CFD-DEM coupled simulation model. Sci. Technol. Eng. 17 (27), 190–195 (2017).
Song, X., Li, G., Wang, M., Yi, C. & Su, X. Numerical simulation on cuttings carrying regularity for Horizonta wells drilled with coiled tubing. Petroleum Drill. Techniques. 42 (02), 28–32 (2014).
Gao, H., Guo, L. & Zhang, X. Liquid–solid separation phenomena of two-phase turbulent flow in curved pipes. Int. J. Heat Mass Transf. 45 (25), 4995–5005 (2002).
Wu, P. et al. Research on cuttings carrying principle of new aluminum alloy drill pipe and numerical simulation analysis. Energies 16 (15), 5618 (2023).
Anderson, T. B. & Jackson, R. O. Y. Fluid mechanical description of fluidized beds. Equations of motion. Industrial Eng. Chem. Fundamentals. 6 (4), 527–539 (1967).
Wang, Z., Fang, Z., Wang, Z., Zhang, M. & Liao, R. Improvement of sand-washing performance and internal flow field analysis of a novel downhole sand removal device. Sci. Rep. 14 (1), 15482 (2024).
Wang, Z. L. Research on the characteristics of sand particle movement within the wellbore of sand producing oil wells and negative pressure jet sand washing technology. (Doctoral’s Thesis (Yangtze University, 2024).