Xu, C. et al. Future material demand for automotive lithium-based batteries. Commun. Mater. 1, 99 (2020).
Google Scholar
Li, Z. et al. Revealing the thermal safety of Prussian blue cathode for safer nonaqueous batteries. Adv. Energy Mater. 11, 2101764 (2021).
Google Scholar
Lee, J., Lee, T., Char, K., Kim, K. J. & Choi, J. W. Issues and advances in scaling up sulfide-based all-solid-state batteries. Acc. Chem. Res. 54, 3390–3402 (2021).
Google Scholar
Wang, C. et al. All-solid-state lithium batteries enabled by sulfide electrolytes: from fundamental research to practical engineering design. Energy Environ. Sci. 14, 2577–2619 (2021).
Google Scholar
Darmet, N., Charbonnel, J., Reytier, M., Broche, L. & Vincent, R. First experimental assessment of all-solid-state battery thermal runaway propagation in a battery pack. ACS Appl. Energy Mater. 7, 4365–4375 (2024).
Google Scholar
Charbonnel, J. et al. Preliminary study of all-solid-state batteries: evaluation of blast formation during the thermal runaway. iScience 26, 108078 (2023).
Google Scholar
Kim, T. et al. Thermal runaway behavior of Li6PS5Cl solid electrolytes for LiNi0.8Co0.1Mn0.1O2 and LiFePO4 in all-solid-state batteries. Chem. Mater. 34, 9159–9171 (2022).
Google Scholar
Duh, Y.-S., Theng, J.-H., Chen, C.-C. & Kao, C.-S. Comparative study on thermal runaway of commercial 14500, 18650 and 26650 LiFePO4 batteries used in electric vehicles. J. Energy Storage 31, 101580 (2020).
Google Scholar
Zhang, S. et al. Room-temperature, high-voltage solid-state lithium battery with composite solid polymer electrolyte with in-situ thermal safety study. Chem. Eng. J. 400, 125996 (2020).
Google Scholar
Zeng, Z. et al. A safer sodium-ion battery based on nonflammable organic phosphate electrolyte. Adv. Sci. 3, 1600066 (2016).
Google Scholar
Gribble, D. A. et al. Mechanistic elucidation of electronically conductive PEDOT:PSS tailored binder for a potassium-ion battery graphite anode: electrochemical, mechanical, and thermal safety aspects. Adv. Energy Mater. 12, 2103439 (2022).
Google Scholar
Yang, H., Zhuang, G. V. & Ross, P. N. Thermal stability of LiPF6 salt and Li-ion battery electrolytes containing LiPF6. J. Power Sources 161, 573–579 (2006).
Google Scholar
Wu, Y., Wang, S., Li, H., Chen, L. & Wu, F. Progress in thermal stability of all-solid-state-Li-ion-batteries. InfoMat 3, 827–853 (2021).
Google Scholar
Wang, J. et al. Advances in thermal-related analysis techniques for solid-state lithium batteries. InfoMat 5, e12401 (2023).
Google Scholar
Adams, R. A., Varma, A. & Pol, V. G. Mechanistic elucidation of thermal runaway in potassium-ion batteries. J. Power Sources 375, 131–137 (2018).
Google Scholar
Charbonnel, J. et al. Safety evaluation of all-solid-state batteries: an innovative methodology using in situ synchrotron X-ray radiography. ACS Appl. Energy Mater. 5, 10862–10871 (2022).
Google Scholar
Ohneseit, S. et al. Thermal and mechanical safety assessment of type 21700 lithium-ion batteries with NMC, NCA and LFP cathodes–investigation of cell abuse by means of accelerating rate calorimetry (ARC). Batteries 9, 237 (2023).
Google Scholar
Bugryniec, P. J. et al. Review of gas emissions from lithium-ion battery thermal runaway failure — considering toxic and flammable compounds. J. Energy Storage 87, 111288 (2024).
Google Scholar
Lin, L. & Ezekoye, O. A. Time-resolved characterization of toxic and flammable gases during venting of Li-ion cylindrical cells with current interrupt devices. J. Loss Prev. Process Ind. 94, 105488 (2025).
Google Scholar
Liu, T., Kum, L. W., Singh, D. K. & Kumar, J. Thermal, electrical, and environmental safeties of sulfide electrolyte-based all-solid-state Li-ion batteries. ACS Omega 8, 12411–12417 (2023).
Google Scholar
Park, S. S. et al. Solid electrolyte: strategies to address the safety of all solid-state batteries. Adv. Energy Sustain. Res. 4, 2300074 (2023).
Google Scholar
Wang, S. et al. Thermal stability between sulfide solid electrolytes and oxide cathode. ACS Nano 16, 16158–16176 (2022).
Google Scholar
Sun, S. & Xu, J. Safety behaviors and degradation mechanisms of aged batteries: a review. Energy Mater. Devices 2, 9370048 (2024).
Google Scholar
Yan, P. et al. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries. Nat. Commun. 8, 14101 (2017).
Google Scholar
Heenan, T. M. M. et al. Identifying the origins of microstructural defects such as cracking within Ni-rich NMC811 cathode particles for lithium-ion batteries. Adv. Energy Mater. 10, 2002655 (2020).
Google Scholar
Sadd, M., Xiong, S., Bowen, J. R., Marone, F. & Matic, A. Investigating microstructure evolution of lithium metal during plating and stripping via operando X-ray tomographic microscopy. Nat. Commun. 14, 854 (2023).
Google Scholar
Börner, M. et al. Correlation of aging and thermal stability of commercial 18650-type lithium ion batteries. J. Power Sources 342, 382–392 (2017).
Google Scholar
Li, S. et al. Constant-rate heating-induced thermal runaway in 18650-type Li-ion cells charged/discharged at 1 °C: effect of undischargeable Li at anode. J. Power Sources 505, 230082 (2021).
Google Scholar
Gabryelczyk, A., Ivanov, S., Bund, A. & Lota, G. Corrosion of aluminium current collector in lithium-ion batteries: a review. J. Energy Storage 43, 103226 (2021).
Google Scholar
Ma, T. et al. Revisiting the corrosion of the aluminum current collector in lithium-ion batteries. J. Phys. Chem. Lett. 8, 1072–1077 (2017).
Google Scholar
Waldmann, T. et al. Electrochemical, post-mortem, and ARC analysis of Li-ion cell safety in second-life applications. J. Electrochem. Soc. 164, A3154 (2017). This paper pioneeringly demonstrates that the safety of aged cells is strongly correlated with the dominant ageing mechanism.
Google Scholar
Preger, Y., Torres-Castro, L., Rauhala, T. & Jeevarajan, J. Perspective—On the safety of aged lithium-ion batteries. J. Electrochem. Soc. 169, 030507 (2022).
Google Scholar
Zhang, X., Zhu, J. & Sahraei, E. Degradation of battery separators under charge–discharge cycles. RSC Adv. 7, 56099–56107 (2017).
Google Scholar
Ning, Z. et al. Visualizing plating-induced cracking in lithium-anode solid-electrolyte cells. Nat. Mater. 20, 1121–1129 (2021).
Google Scholar
Liang, Z. et al. Understanding the failure process of sulfide-based all-solid-state lithium batteries via operando nuclear magnetic resonance spectroscopy. Nat. Commun. 14, 259 (2023).
Google Scholar
Jiang, F.-N. et al. Higher-order polysulfides induced thermal runaway for 1.0 Ah lithium sulfur pouch cells. Particuology 79, 10–17 (2023).
Google Scholar
Xiang, Y. et al. Advanced separators for lithium‐ion and lithium–sulfur batteries: a review of recent progress. ChemSusChem 9, 3023–3039 (2016).
Google Scholar
Roth, E. P., Doughty, D. H. & Pile, D. L. Effects of separator breakdown on abuse response of 18650 Li-ion cells. J. Power Sources 174, 579–583 (2007).
Google Scholar
Zhao, Q., Stalin, S., Zhao, C.-Z. & Archer, L. A. Designing solid-state electrolytes for safe, energy-dense batteries. Nat. Rev. Mater. 5, 229–252 (2020).
Google Scholar
Fang, C. et al. Pressure-tailored lithium deposition and dissolution in lithium metal batteries. Nat. Energy 6, 987–994 (2021).
Google Scholar
Sharifi-Asl, S., Lu, J., Amine, K. & Shahbazian-Yassar, R. Oxygen release degradation in Li-ion battery cathode materials: mechanisms and mitigating approaches. Adv. Energy Mater. 9, 1900551 (2019).
Google Scholar
Kaur, G. & Gates, B. D. Review—Surface coatings for cathodes in lithium ion batteries: from crystal structures to electrochemical performance. J. Electrochem. Soc. 169, 043504 (2022).
Google Scholar
Finegan, D. P. et al. Modelling and experiments to identify high-risk failure scenarios for testing the safety of lithium-ion cells. J. Power Sources 417, 29–41 (2019).
Google Scholar
Finegan, D. P. et al. Identifying the cause of rupture of Li-ion batteries during thermal runaway. Adv. Sci. 5, 1700369 (2018).
Google Scholar
Walker, W. et al. Decoupling of heat generated from ejected and non-ejected contents of 18650-format lithium-ion cells using statistical methods. J. Power Sources 415, 207–218 (2019).
Google Scholar
Walker, W. Q. et al. The effect of cell geometry and trigger method on the risks associated with thermal runaway of lithium-ion batteries. J. Power Sources 524, 230645 (2022).
Google Scholar
Finegan, D. P. et al. Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits. Energy Environ. Sci. 10, 1377–1388 (2017).
Google Scholar
Finegan, D. P. et al. In-operando high-speed tomography of lithium-ion batteries during thermal runaway. Nat. Commun. 6, 6924 (2015). To the best of our knowledge, this paper first demonstrated the use of high-speed synchrotron X-ray computed tomography and radiography, combined with thermal imaging, to monitor internal damage and thermal behaviour during thermal runaway in LIBs.
Google Scholar
Wang, Y. et al. Progress and challenges in ultrasonic technology for state estimation and defect detection of lithium-ion batteries. Energy Storage Mater. 69, 103430 (2024).
Google Scholar
McGee, T. M., Neath, B., Matthews, S., Ezekoye, O. A. & Haberman, M. R. Ultrasonic inspection of lithium-ion pouch cells subjected to localized thermal abuse. J. Power Sources 583, 233542 (2023).
Google Scholar
McGee, T. M., Neath, B., Matthews, S., Ezekoye, O. A. & Haberman, M. R. Ultrasonic detection of pre-existing thermal abuse in lithium-ion pouch cells. J. Power Sources 595, 234035 (2024).
Google Scholar
Davies, G. et al. State of charge and state of health estimation using electrochemical acoustic time of flight analysis. J. Electrochem. Soc. 164, A2746–A2755 (2017).
Google Scholar
Kim, J.-Y., Jo, J.-H. & Byeon, J.-W. Ultrasonic monitoring performance degradation of lithium ion battery. Microelectron. Reliab. 114, 113859 (2020).
Google Scholar
Robinson, J. B. et al. Spatially resolved ultrasound diagnostics of Li-ion battery electrodes. Phys. Chem. Chem. Phys. 21, 6354–6361 (2019).
Google Scholar
Finegan, D. P. et al. The Battery Failure Databank: insights from an open-access database of thermal runaway behaviors of Li-ion cells and a resource for benchmarking risks. J. Power Sources 597, 234106 (2024). This paper presents a pioneering battery failure database for understanding the variation in commercial cell behaviours during thermal runaway.
Google Scholar
Masalkovaitė, K., Gasper, P. & Finegan, D. P. Predicting the heat release variability of Li-ion cells under thermal runaway with few or no calorimetry data. Nat. Commun. 15, 8399 (2024).
Google Scholar
Bates, A. et al. A multi-scale framework for advancing battery safety through early calorimetric analysis of materials and components. Electrochem. Soc. Interface 33, 69 (2024). This paper presented a new strategy to bridge battery material and component characterization with safety prediction of large-format cells through targeted experiments and validated modelling.
Google Scholar
Li, W., Zhu, J., Xia, Y., Gorji, M. B. & Wierzbicki, T. Data-driven safety envelope of lithium-ion batteries for electric vehicles. Joule 3, 2703–2715 (2019). To the best of our knowledge, this paper presents the first demonstration of combining numerical data generation with machine learning to predict the mechanical safety of battery systems for EV applications.
Google Scholar
Hendricks, C., Williard, N., Mathew, S. & Pecht, M. A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries. J. Power Sources 297, 113–120 (2015).
Google Scholar
Premnath, V., Wang, Y., Wright, N., Khalek, I. & Uribe, S. Detailed characterization of particle emissions from battery fires. Aerosol Sci. Technol. 56, 337–354 (2022).
Google Scholar
Finegan, D. P. et al. Investigating lithium-ion battery materials during overcharge-induced thermal runaway: an operando and multi-scale X-ray CT study. Phys. Chem. Chem. Phys. 18, 30912–30919 (2016).
Google Scholar
Franqueville, J. I., Archibald, E. J. & Ezekoye, O. A. Data-driven modeling of downwind toxic gas dispersion in lithium-ion battery failures using computational fluid dynamics. J. Loss Prev. Process Ind. 86, 105201 (2023).
Google Scholar
Lu, G., Nai, J., Luan, D., Tao, X. & Lou, X. W. Surface engineering toward stable lithium metal anodes. Sci. Adv. 9, eadf1550 (2023).
Google Scholar
Zhao, C. et al. Polysulfide-incompatible additive suppresses spatial reaction heterogeneity of Li-S batteries. Joule 8, 3397–3411 (2024).
Google Scholar
Kaur, A. P. et al. Overcharge protection of lithium-ion batteries above 4 V with a perfluorinated phenothiazine derivative. J. Mater. Chem. A 4, 5410–5414 (2016).
Google Scholar
Tranter, T. G. et al. Probing heterogeneity in Li-ion batteries with coupled multiscale models of electrochemistry and thermal transport using tomographic domains. J. Electrochem. Soc. 167, 110538 (2020).
Google Scholar
Liu, K., Liu, Y., Lin, D., Pei, A. & Cui, Y. Materials for lithium-ion battery safety. Sci. Adv. 4, eaas9820 (2018).
Google Scholar
Hebert, A. & McCalla, E. The role of metal substitutions in the development of Li batteries, part I: cathodes. Mater. Adv. 2, 3474–3518 (2021).
Google Scholar
Song, Y. et al. The significance of mitigating crosstalk in lithium-ion batteries: a review. Energy Environ. Sci. 16, 1943–1963 (2023).
Google Scholar
Hales, A., Marzook, M. W., Bravo Diaz, L., Patel, Y. & Offer, G. The surface cell cooling coefficient: a standard to define heat rejection from lithium ion battery pouch cells. J. Electrochem. Soc. 167, 020524 (2020).
Google Scholar
Xu, C. et al. A comparative study of the venting gas of lithium-ion batteries during thermal runaway triggered by various methods. Cell Rep. Phys. Sci. 4, 101705 (2023).
Google Scholar
Pereira, D. J., McRay, H. A., Bopte, S. S. & Jalilvand, G. H2O/HF scavenging mechanism in cellulose-based separators for lithium-ion batteries with enhanced cycle life. ACS Appl. Mater. Interfaces 16, 5745–5757 (2024).
Google Scholar
Ostanek, J. K., Li, W., Mukherjee, P. P., Crompton, K. R. & Hacker, C. Simulating onset and evolution of thermal runaway in Li-ion cells using a coupled thermal and venting model. Appl. Energy 268, 114972 (2020).
Google Scholar
Yang, S.-J. et al. Oxygen-induced thermal runaway mechanisms of Ah-level solid-state lithium metal pouch cells. eTransportation 18, 100279 (2023). This paper pioneeringly proposes that the dominant exothermic reaction in Ah-level ASSBs may arise from crosstalk between the cathode and the LPSCl solid electrolyte, rather than between the cathode and the lithium metal anode.
Google Scholar
Ruiz, V. et al. A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles. Renew. Sustain. Energy Rev. 81, 1427–1452 (2018).
Google Scholar